Juniper Networks EX4600-40F-AFO
- Réf. d'article : A1000834
- Numéro de fabricant EX4600-40F-AFO
Demander une offre économique:
Si vous avez besoin d'un devis, placez les articles de votre choix dans le panier et cliquez sur le bouton « Demande de prix ». Remplissez tous les champs et vous recevrez rapidement une offre. Si vous ne trouvez pas les articles que vous recherchez dans la boutique, veuillez nous envoyer votre demande sans engagement via notre formulaire d'offre.
Juniper EX4600-40F-AFO – Switch
Catégorie : Appareils réseau
Fabricant : Juniper Networks
Modèle : EX4600-40F-AFO
EAN/UPC : 0832938068971
Description du produit
Le Juniper EX4600 est un commutateur Layer 3 performant, doté de 24 ports SFP+ 1/10G et de 4 ports QSFP+ 40G (compatibles Breakout). Il est idéal pour les centres de données, les réseaux de campus et les environnements d’entreprise à fort trafic de données.
Caractéristiques techniques
Fonctionnalités
- Type d’appareil : Commutateur L3, managé
- Format : 1U, montable en rack, circulation d'air avant vers arrière
- Ports : 24 x 1/10G SFP+, 4 x 40G QSFP+ (compatibles Breakout)
- Capacité de commutation : 1,44 Tbps
- Transfert de paquets : 1,07 Bpps
Capacité & performances
- Table d’adresses MAC : 288 000 entrées
- VLANs : jusqu’à 4091
- Groupes LAG : 128 (32 ports par groupe)
- Routes IPv4 (Unicast) : 128 000
- Routes IPv6 (Unicast) : 64 000
- Politiques de pare-feu : 4 000
- Prise en charge des trames Jumbo : jusqu’à 9216 octets
Extension & connectivité
- 2 emplacements d’extension (libres)
- 1 x RJ-45 Management
- 1 x Console (Management)
- 1 x USB Management
- 1 x SFP Management
Protocoles de routage & réseau
Prise en charge d’un large éventail de protocoles de routage tels que OSPF, BGP, IS-IS, RIP, PIM-SM, IGMP (v2/v3), MPLS, ainsi que le routage multicast et unicast (IPv4/IPv6). Également disponibles : ECMP, BFD, CIDR, VRRP et bien plus.
Gestion & sécurité
- Protocoles : SNMP (v1/2/3), RMON, Telnet, TFTP, SSH, CLI
- Authentification : RADIUS, TACACS+, SSH v2
- Chiffrement : MD5
Alimentation
- Alimentation interne hot-plug (2 installées, redondance 1+1)
- Tension : 120/230 V AC (50/60 Hz)
- Consommation électrique : 279 watts
- Certifié 80 PLUS Silver
Fonctionnalités avancées
- Prise en charge PoE, VLAN, QoS, ACLs
- Virtual Chassis, DHCP Snooping, DAI
- Non-Stop Routing (NSR), Non-Stop Bridging (NSB)
- Protocoles Spanning Tree (STP, RSTP, MSTP, VSTP)
- sFlow v5, Cut-Through, SDWRR
- FCoE, LLQ, WRED, RTG, GRES
- Protection DoS, filtrage IGMP
Certifications
- NEBS Niveau 3, RoHS, WEEE, REACH
- FCC, VCCI Classe A, CB, UL, IEC, EN
- China RoHS, BSMI, NCC, AS/NZS, GR-1089/63-CORE
Dimensions et poids
- Dimensions (L x P x H) : 44,09 x 52,02 x 4,37 cm
- Poids : 9,9 kg
Conditions environnementales
- Température de fonctionnement : 0 à 40 °C
- Température de stockage : -40 à 70 °C
- Humidité (fonctionnement) : 5–90 % (sans condensation)
- Humidité (stockage) : 0–95 % (sans condensation)
EX4600-40F-AFO |
Produktinformationen
| Produktbeschreibung | Juniper EX Series EX4600 - Switch - 40 Anschlüsse - verwaltet - an Rack montierbar |
| Gerätetyp | Switch - 40 Anschlüsse - L3 - verwaltet |
| Art | An Rack montierbar 1U |
| Untertyp | 10 Gigabit Ethernet |
| Ports | 24 x 1 Gigabit SFP/ 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ (Breakout-kompatibel) |
| Leistung | Switching-Kapazität: 1,44 Tbit/s ¦ Switching-Kapazität: 1,07 Bpps |
| Kapazität | Virtuelle Schnittstellen (VLANs): 4091 ¦ LAG-Gruppen: 128 ¦ Maximale Mitgliedports pro LAG: 32 ¦ Firewall-Richtlinien: 4000 ¦ IPv4-Routen (Unicast): 128000 ¦ IPv4-Hosts: 208000 ¦ ECMP-Pfade (Equal-Cost Multipathing): 64 ¦ IPv4-Routen (Multicast): 104000 ¦ IPv6-Routen (Multicast): 52000 ¦ ARP-Einträge: 48000 ¦ IPv6-Routen (Unicast): 64000 ¦ Multiple Spanning Tree Protocol-Instanzen: 64 ¦ VLAN Spanning Tree Protocol-Instanzen: 253 ¦ QoS-Hardwarewartschlangen pro Port: 12 |
| Größe der MAC-Adresstabelle | 288K Einträge |
| Jumbo-Rahmenunterstützung | 9216 Byte |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, MSDP, statisches IPv4-Routing, ECMP, MPLS, Bidirectional Forwarding Detection (BFD), CIDR |
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, SSH, CLI |
| Leistungsmerkmale | VPN-Support, BOOTP-Unterstützung, RARP-Unterstützung, ARP-Unterstützung, Trunking, VLAN-Unterstützung, Schutz vor DoS-Angriffen, Store-and-Forward, MAC-Adressenfilter, IPv6-Unterstützung, Hochverfügbarkeit, SNTP-Unterstützung, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP)-Unterstützung, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, Data Center Bridging Exchange (DCBX)-Unterstützung, prioritätsbasierte Flusssteuerung, DHCP-Snooping, Unterstützung für Access Control List (ACL), Quality of Service (QoS), DHCP-Server, Dynamic ARP Inspection (DAI), Redundant trunk group (RTG), Virtual Chassis-Technologie, Non-Stop Bridging (NSB), Non-Stop Routing (NSR), Graceful Route Engine Switchover (GRES), Luftstrom von vorn nach hinten, DHCP-Relais, VLAN Spanning Tree Protocol (VSTP), redundante Hot-Swap-Lüfter, Class of Service (CoS), sFlow v5, Cut-Through, 12 MB gemeinsam genutzter Puffer, IGMP-Filterung, Smoothed Deficit Weighted Round Robin (SDWRR), FCoE-Support |
| Produktzertifizierungen | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg |
| Stromversorgung | Wechselstrom 120/230 V (50/60 Hz) |
| Redundante Stromversorgung | Ja |
| Abmessungen (Breite x Tiefe x Höhe) | 44.09 cm x 52.02 cm x 4.37 cm |
| Gewicht | 9.9 kg |
Erweiterte Produktdetails
Allgemein
| Gerätetyp | Switch - 40 Anschlüsse - L3 - verwaltet |
| Art | An Rack montierbar 1U |
| Untertyp | 10 Gigabit Ethernet |
| Ports | 24 x 1 Gigabit SFP/ 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ (Breakout-kompatibel) |
| Leistung | Switching-Kapazität: 1,44 Tbit/s ¦ Switching-Kapazität: 1,07 Bpps |
| Kapazität | Virtuelle Schnittstellen (VLANs): 4091 ¦ LAG-Gruppen: 128 ¦ Maximale Mitgliedports pro LAG: 32 ¦ Firewall-Richtlinien: 4000 ¦ IPv4-Routen (Unicast): 128000 ¦ IPv4-Hosts: 208000 ¦ ECMP-Pfade (Equal-Cost Multipathing): 64 ¦ IPv4-Routen (Multicast): 104000 ¦ IPv6-Routen (Multicast): 52000 ¦ ARP-Einträge: 48000 ¦ IPv6-Routen (Unicast): 64000 ¦ Multiple Spanning Tree Protocol-Instanzen: 64 ¦ VLAN Spanning Tree Protocol-Instanzen: 253 ¦ QoS-Hardwarewartschlangen pro Port: 12 |
| Größe der MAC-Adresstabelle | 288K Einträge |
| Jumbo-Rahmenunterstützung | 9216 Byte |
| Fibre Channel | FC-BB-6 |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, IGMPv3, MSDP, statisches IPv4-Routing, ECMP, MPLS, Bidirectional Forwarding Detection (BFD), CIDR |
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, SSH, CLI |
| Encryption Algorithm | MD5 |
| Authentifizierungsmethode | Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Leistungsmerkmale | VPN-Support, BOOTP-Unterstützung, RARP-Unterstützung, ARP-Unterstützung, Trunking, VLAN-Unterstützung, Schutz vor DoS-Angriffen, Store-and-Forward, MAC-Adressenfilter, IPv6-Unterstützung, Hochverfügbarkeit, SNTP-Unterstützung, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP)-Unterstützung, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, Data Center Bridging Exchange (DCBX)-Unterstützung, prioritätsbasierte Flusssteuerung, DHCP-Snooping, Unterstützung für Access Control List (ACL), Quality of Service (QoS), DHCP-Server, Dynamic ARP Inspection (DAI), Redundant trunk group (RTG), Virtual Chassis-Technologie, Non-Stop Bridging (NSB), Non-Stop Routing (NSR), Graceful Route Engine Switchover (GRES), Luftstrom von vorn nach hinten, DHCP-Relais, VLAN Spanning Tree Protocol (VSTP), redundante Hot-Swap-Lüfter, Class of Service (CoS), sFlow v5, Cut-Through, 12 MB gemeinsam genutzter Puffer, IGMP-Filterung, Smoothed Deficit Weighted Round Robin (SDWRR), FCoE-Support |
| Produktzertifizierungen | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg |
| Statusanzeiger | Status |
Erweiterung / Konnektivität
| Schnittstellen | 24 x 10GBase-X SFP+ ¦ 4 x 40Gbit-LAN QSFP+ (Breakout-kompatibel) ¦ 1 x RJ-45 Management ¦ 1 x Konsole Management ¦ 1 x USB Management ¦ 1 x SFP Management |
| Erweiterungssteckplätze | 2 (gesamt)/ 2 (frei) x Erweiterungssteckplatz |
Maße und Gewicht
| Breite | 44.09 cm |
| Tiefe | 52.02 cm |
| Höhe | 4.37 cm |
| Gewicht | 9.9 kg |
Stromversorgung
| Stromversorgungsgerät | Internes Netzteil - Hot-Plug |
| Installierte Anzahl | 2 (installiert) / 2 (Max) |
| Redundante Stromversorgung | Ja |
| Plan für redundante Stromversorgung | 1+1 |
| Erforderliche Netzspannung | Wechselstrom 120/230 V (50/60 Hz) |
| Leistungsaufnahme im Betrieb | 279 Watt |
Umgebungsbedingungen
| Min Betriebstemperatur | 0 °C |
| Max. Betriebstemperatur | 40 °C |
| Zulässige Luftfeuchtigkeit im Betrieb | 5 - 90% (nicht kondensierend) |
| Min. Lagertemperatur | -40 °C |
| Max. Lagertemperatur | 70 °C |
| Zulässige Luftfeuchtigkeit bei Lagerung | 0 - 95% (nicht kondensierend) |
Verschiedenes
| Produktzertifizierungen | NEBS Stufe 3, EN55022 Klasse A, CB, FCC CFR47 Part 15, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, 80 PLUS Silver, WEEE, RoHS, BSMI CNS 13438, REACH, EN 60825-1, CAN/CSA C22.2 No. 60950-1, GR-1089-CORE, VCCI Class A, GR-63-CORE, NCC, China RoHS, AS/NZS CISPR22:2009 |
| Header / Produktlinie | Juniper EX Series | ||
| Header / Modell | EX4600 | ||
| Header / Marke | Juniper |
Plus d'informations
Oskar-Schlemmer-Str. 15
80807
München
Deutschland
info @ juniper.net
089 203012000
Oskar-Schlemmer-Str. 15
80807
München
Deutschland
info @ juniper.net
089 203012000
